Home / All / Automatic sandblasting machine series /

Automatic double-sided sandblasting equipment for stainless steel plate

Automatic double-sided sandblasting equipment for stainless steel plate

Automatic double-sided sandblasting equipment for stainless steel plate
Automatic double-sided sandblasting equipment for stainless steel plateAutomatic double-sided sandblasting equipment for stainless steel plateAutomatic double-sided sandblasting equipment for stainless steel plateAutomatic double-sided sandblasting equipment for stainless steel plate
CategoriesAutomatic sandblasting machine series
BrandXintai
Update TimeMar 29,2024
Detail Information
Product parameters
Model
 XT1560-12A
Dimensions
8000*1800*2300
Indoor size
2000*1800*1200
Separator size
950 high * 600 diameter
Split dust box
400mm*1400mm, Design 9 filter cores with 1 set
Dust removal power
   7.5Kw        380v=1 set
dust removal air volume
5600 cubic meters / h
Wind pressure 
1820pa
Lighting 
five 18w fluorescent lamp 
Number of spray guns
12 (aluminum alloy with boron carbide nozzle)
Shell
 3.0-6mm cold rolled steel plate welded
 Perspective window 
 2 frames
Principle
Inhalation type blasting, that is, using compressed air to flow at a high speed in the lance to form a negative pressure to generate an ejector, the sand in the cyclone tank is sucked into the lance through the shale pipe, and then jetted at high speed by the nozzle with the compressed air flow. Go to the surface of the workpiece to achieve the purpose of steel pipe blasting.
Advantage
Air pressure is greater than 5.5bar (kg/cm2) [Air compressor is more than 10 cubic meters] Machine processing efficiency:
The speed of processing ordinary stainless steel plates with a width of 1560 mm is 0.5-2 m per minute, including the front and back sides, and the surface reaches the sa2.5 level.

Can handle 0.3mm stainless steel plate without deformation, five yin and yang. Sandblasting evenly
1. It can work all day, and the work is not interfered by the external environment.
2. Pollutants and other pollutants discharge in line with national environmental standards.
3. Adopting pneumatic recovery type abrasive recovery method.
4. Low failure rate, simple maintenance and low cost.
3. Environmental protection:
A. The environmental issues involved are: industrial dust, vibration, and noise.
     Industrial dust emission set ventilation and dust removal system, emission concentration ≤120mg/m3, emission rate ≤3.5Kg/h
Noise: machine equipment ≤ 70DB (national standard)
Please send your message to us
*Email
Name
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

We will get you a fast free quote and schedule your job on the day and time that works best for you.

subscription